One way to beautify and protect your floors wall base at the same time is to install the base of the Bay. Cove base is the type of flooring installed in a place where the wall meets the floor. Rubber and vinyl tiles used in flooring techniques because they are quite cheap when compared to traditional wooden edge. This material is also easy to install and require little maintenance. Available in a variety of colours and unique designs, the Bay Foundation created to match with any home interior designing. The
basic things required for this are basic tiles of the Gulf, cutting
instruments and mortar or adhesive to attach the tile to the wall. Tiles are easily available at home improvement stores and also with some variety of online retailers. You can seek help from a professional flooring contractor to lay the tiles or could even do it yourself. Guidebooks about the installation process can be used if you do this task on its own. So if you want to change a drab space into one, then go for a basic installation of the Bay. Trust me, you will not regret your decision and you will get all your money.
Installation Instructions Base Cove
Basic installation of the Gulf can be done in a way that is easy and you don't need to be a veteran to do it. By having some basic skills you can put the tiles along the walls and floors, yourself.
Review the floor plan of the room, where you install the bottom of the Bay. Take the proper measurements before laying the tiles.
Lay the tiles to get a rough picture of how they will look, after the actual process has been completed. If you are satisfied with the results, you can proceed with the task.
With the help of an electric tile saw, cut the tiles evenly based on the Gulf floor measurements taken from the floor. After the tile has been cut, apply the adhesive for tiles on the Gulf floor face down and press firmly to the wall. Repeat this procedure until all the tiles have been laid.
With the help of a wet washcloth, rub off the excess adhesive from tiles, before being dried. If you have been maintaining uniformity while laying tiles, edges can be hardly seen.
Let the tile set for about a day and press again so that they are pressed firmly against the wall.
Maintenance is also quite simple as the installation. To clean the tiles, you can choose a mild cleanser available in every household, such as a detergent or soapy water.
In the case of any kind of tile has broken or detached from the wall, can be easily pulled from the walls and replaced. Using a small tool, the old vinyl tiles can be removed from the wall. Re-installation of adhesive, repair involves reapplication to the wall and recaulking.
Make
your home more stylish interior with an install base of the Bay which
is available in the colors and design of versatile roof tiles. This can add a dramatic effect to the appearance of any room in your home.
